Log Your AI Notify me

How it works · Calories

kJ to calories: what a ride really burns

Marco Bremer

Every cycling app shows a calorie number next to the watts. When I built RawWatts I had to decide what that number should be, so I looked into where it comes from. This is what I found, and what the app does with it.

Why bother? Because calories matter at both ends. A professional needs them to plan and optimise fuelling. The rest of us need them to understand how much (or how little) extra food a workout justifies without gaining weight. Both get it wrong if the number is flattering.

kJ and kcal: one is measured, one is estimated

Both are units of energy. 1 kcal is 4.184 kJ. The "calories" on a food label and in a fitness app are kilocalories.

On a bike they stand for two different things:

  • kJ is the work you put into the pedals. A smart trainer measures your power in watts, and one watt for one second is one joule. Ride 200 W for an hour and you have done 200 × 3,600 = 720,000 J, or 720 kJ. That number is as good as your trainer, usually within 1 to 2 %.
  • kcal is what your body burned to do that work. Nobody measures that on a trainer. It is calculated from the kJ, with an assumption.

The assumption is your efficiency. Muscles turn only about a fifth of the energy they burn into work on the pedals. The rest becomes heat, which is why you need a fan.

How calories are calculated from watts

calories burned (kcal) = work (kJ) / 4.184 / gross efficiency

Gross efficiency is work done divided by total energy burned. Everything depends on which value you put in.

Where "1 kJ = 1 kcal" comes from

If you assume an efficiency of 24 %, the two factors cancel: 4.184 × 0.24 is almost exactly 1. So 720 kJ of work become 717 kcal burned, and you can read the kJ as calories. Many cycling apps and bike computers do just that. It is a convenient rule, and it is why kJ and calories so often show the same number.

The catch is that 24 % sits at the favourable end of what is measured in riders.

How much efficiency varies

Measured gross efficiency in cyclists lies between about 18 and 25 %. Two things are worth knowing:

  • Fitness barely changes it. A study of 69 cyclists, from recreational to world-class, found no difference in efficiency between the groups (Moseley et al., 2004). A stronger rider burns more because they push more watts, not because their body is a better engine.
  • Power changes it. Your body burns energy just to stay alive and to move your legs, before any watt reaches the trainer. At low power that fixed cost is a large share, so efficiency is low. In the same study, efficiency at 165 W was around 18 to 19 %. At higher power it climbs into the low twenties.

What that means for one hour at 200 W, which is always 720 kJ:

Gross efficiency Calories burned
18 % 956 kcal
20 % 860 kcal
21 % 819 kcal
22 % 782 kcal
24 % (the 1:1 rule) 717 kcal
25 % 688 kcal

Same ride, same trainer, and a spread of almost 270 kcal. Over a two-hour ride the gap between an 18 % rider and the 1:1 rule is close to 500 kcal. That is a meal.

Why your calories differ between apps and devices

If the same ride shows different calories in two places, it is usually one of these:

  • A different efficiency. 1:1, or something else, and it is rarely stated.
  • Heart rate instead of power. Watches and many head units estimate calories from heart rate, age and weight. With a power meter connected, that is the weaker method (see below).
  • Total or active calories. Some numbers include what you would have burned anyway in that hour, others only the extra.
  • The trainer's own count. Smart trainers can send a calorie total over Bluetooth. Which efficiency went into it isn't documented.

Does heart rate make the estimate better?

It is the obvious candidate, and it mostly doesn't.

  • Heart rate drifts. Hold 200 W for an hour and your heart rate can climb from 135 to 150 as you heat up. You are not burning 10 % more. And a low heart rate at 200 W doesn't tell whether your efficiency is 20 or 24 %.
  • FTP says how hard 200 W is for you, not what it costs you.
  • DFA α1, which RawWatts shows from a heart-rate strap, tells where you are relative to your thresholds. There is no validated way to turn it into calories.
  • Cadence has some effect: at the same power, spinning very fast costs more. Not enough is known to put a number on it for one rider.

The only thing that really improves on power is measuring the gas you breathe in a lab. That gives your own efficiency, ideally at several power levels.

A second, independent formula points to the same range. The American College of Sports Medicine estimates oxygen uptake on a bike from power and body weight. For a 75 kg rider at 200 W it comes out at about 805 kcal per hour, within 2 % of the result at 21 %.

What RawWatts shows

  • kJ, exactly. It is the measurement: the sum of every recorded second's watts. It is on the ride screen, in the summary and in the history.
  • CAL, as an estimate at 21 % gross efficiency:
CAL = kJ / (4.184 × 0.21)

One hour at 200 W is 720 kJ and 819 kcal. That is about 14 % more than the 1:1 rule gives.

  • Why 21 %: it is a middle value for the power most of us ride at. The 1:1 rule assumes the best case and counts low for nearly everyone. At easy power even 21 % is generous, so if RawWatts is off for you, it is more likely still a bit low than too high.
  • It is your total burn. The energy you would have used sitting still is included.
  • The same number goes into the FIT file, for the ride and for each lap.
  • How precise it is: read it as plus or minus 15 %. The app shows 819, and it means "about 820". The trainer's error is small next to the unknown in your efficiency.

How much can you eat after a ride?

Less than the big number suggests, for two reasons.

  1. Take off what you would have burned anyway. At rest most adults use roughly 70 to 90 kcal per hour, and that is already part of your normal day. An easy 45 minutes at 150 W is 405 kJ and about 460 kcal in total, so about 400 kcal more than the same time on the sofa.
  2. Keep the error in mind. Plus or minus 15 % on 400 kcal is 60 kcal either way. Planning a daily deficit of 100 kcal around this number doesn't work, with any app.

If you ride to lose weight, the honest reading is: a moderate hour on the trainer earns you a normal snack, not a second dinner.

And for fuelling?

Calories burned are not the same as carbohydrate to replace. At easy intensity a good part of the energy comes from fat, of which everyone carries plenty. The harder you ride, the more comes from carbohydrate, and that store is small. So the calorie number says how much energy a ride cost, and the intensity says how much of it you need to eat during and after. For a fuelling plan, use kJ and your power zones together, not the calorie number alone.

What the app doesn't do yet

One fixed factor is a compromise, and I know where it is weak: efficiency changes with power, and it differs between riders. Three things I am thinking about:

  • an efficiency that follows your power instead of one number for the whole ride;
  • your own efficiency, if you have had it measured;
  • showing active calories next to the total.

RawWatts records power, cadence and heart rate for every second, so the data for a model that adapts to the rider is there. I will only build it if it is demonstrably closer to the truth than the simple formula. A more complicated number that is no more right would be the opposite of what this app is for.

← Log and notes

No-nonsense indoor cycling for iPhone. Coming soon.

Log Support Press Legal notice Terms Privacy Contact
© 2026 blue media labs GmbH · Made in Germany Built by Marco Bremer, maker of the HEROTIME sports stopwatch and the SwimX FINA points calculator